The DC-501 is a revolutionary backflow prevention device which consists of two independently acting, spring-loaded check valves. It also features four test cocks and two built-in resilient seated shut-off valves which round-out the assembly. With an operating pressure of 150 psi and temperatures up to 110 degrees (F), the double check backflow preventer from A.R.I. is constructed to supply exceptional protection and resilience against back flow caused by negative or opposite pressure.
The 1" double check backflow preventer is recommended where the degree of contamination is considered low hazard and doesn?t require the use of a reduce pressure device installed in high hazard applications. This trustworthy and minimally maintained assembly doesn't require specialized equipment to service as its two, easily replaceable, spring check valves are situated in independent capsules. This modular design, and nylon composite body, makes it the backflow of tomorrow.
Each check valve is designed to maintain a minimum of 1 PSI across the backflow preventer in normal standard operation. If at any time the pressure leaving the mechanism increases above the incoming pressure, both check valves will seal to prevent any backflow from occurring.
To learn more about pricing, sizes, and installation, fill out the easy contact form on the right and a member of our team will answer any questions you have about our 1 inch backflow preventer from A.R.I. If you?re ready to move ahead, simply click ?buy now? below and be connected to our secure payment area. Contractors will enjoy significant discounts when ordering in bulk. If you have a special order over 50 units, please specify your volume and delivery needs in the contact form.